Hewlett Packard RESET METHOD

To clear the Maintenance Service Message from the LCD display:

HP IIISi Printers:

1. Press
ONLINE until the light goes off
2. Hold down
MENU until PCL CONFIG MENU appears
3. Press the
MENU key until SERVICE MSG=ON* appears
4. Press the
+ or - key to change display to SERVICE MSG=OFF
5. Press
ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE

HP 4Si Printers:

1. Press
ONLINE until the light goes off
2. Press
MENU until CONFIG MENU appears
3. Press the
ITEM key until SERVICE MSG=ON* appears
4. Press the
+ or - key to change display to SERVICE MSG=OFF
5. Press the
ENTER key to turn message off, the * should appear, then press ONLINE

HP 5Si:

1. Press
MENU key 4 times for CONFIG MENU
2. Press
ITEM to display SERVICE MESSAGE=OFF
3. Press
ENTER
4. Press
ONLINE

HP 4000/4050/4100/5000 Printers:

1. Turn the printer off
2. Hold down the left side of the
ITEM and VALUE +/- keys, turn the printer on and wait
until RESET MAINTENANCE COUNT is displayed and then release the keys

HP 4500/4550 Printers:

1. Turn the printer off
2. Hold down the
CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED's come on
3. Press the right side of the
MENU key, then press the SELECT key
4. You will enter
SERVICE MODE after the normal test completes
5. Press the
ITEM key until the FUSER MAINTENANCE COUNT appears
6. Press
VALUE +/- to change to zero
7. Press
SELECT to save
8. Press
GO; the printer should return to READY

HP 8000/8100/8150 Printers:

1. Press the
MENU button until the display reads CONFIGURATION MENU
2. Press the
ITEM button until the display reads SERVICE MESSAGE = ON/OFF
3. Select
OFF*
4. Press
SELECT to save
5. Turn printer off
6. Hold the
VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until display reads RESET MAINT/COUNTand then release both buttons

HP 9000 Printers:

1. Turn the printer off
2. Press and hold the
CHECK key
3. Power on the printer
4. Release the
CHECK key after all three lights come on The display should read SELECT LANGUAGE
5. Press the up arrow until
MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset

HP Color LaserJet 4500/4550 Printers (TRANSFER KIT RESET):

1. Press the
MENU button until the RESETS MENU is displayed
2. Press the
ITEM button until TRANSFER KIT SELECT IF DONE is displayed
3. Press the
SELECT button

HP Color LaserJet 4500/4550 Printers (FUSER KIT RESET):

1. Press the
MENU button until the RESETS MENU is displayed
2. Press the
ITEM buton until FUSER KIT SELECT IF DONE is displayed
3. Press the
SELECT button
4. Press the
GO button to return to READY

HP Color LaserJet 4600 Printer (IMAGE TRANSFER KIT (ETB) RESET):

1. After Maintenance is performed, the display should read
NEW TRANSFER KIT =
2. Press the down arrow to highlight
YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW TRANSFER KIT and select

HP Color LaserJet 4600 Printer (FUSER KIT RESET):

1. After Maintenance is performed, the display should read
NEW FUSER KIT =
2. Press the down arrow to highlight
YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW FUSER KIT and select

HP Color LaserJet 8500/8550 Printers (TRANSFER KIT RESET):

1. Press the
MENU button until the RESETS MENU is displayed
2. Press the
ITEM button until RESET TRANSFER LIFE COUNT is displayed
3. Press the
SELECT button to reset, then GO to return to READY

HP Color LaserJet 8500/8550 Printers (FUSER KIT RESET):

Press the

MENU button until the RESETS MENU is displayed

Press the

ITEM buton until RESET FUSER LIFE COUNT is displayed

Press the

SELECT button to reset